Microtek NDT-2000 User Manual

NDT-2000 User's Manual 47
Optional Auto Film Feeder (AFF)
The Auto Film Feeder (AFF) is an optional accessory for the NDT-2000 digitizer.
The AFF only works with X-ray lm, allowing to perform automatic scanning
of up to 15 sheets of the X-ray lm at a time. It increases convenience and
efciency in multiple-sheet-scanning of X-ray lm.
After unpacking the AFF package, check for the item shown below.
Specications of AFF:
– Film Capacity : Up to 15 sheets of lms
– Dimension: 458 (L) x 90 (W) x 438 (H) mm
– Weight: 4.45 kg
– Scanning Area: Min .2.5” x 10”; Max. 14” x 17”
The coming section describes how to install the AFF on the NDT-2000 through
the NDT-2000's accessory port and how to scan X-ray lms by using the AFF.

Microtek NDT-2000 Specifications

Scanning Specifications

resolution	1200 dpi (21 μm)
optical density	0.37D~ 4.5D
scanning area min	2.5” x 2.5” (63.5 mm x 63.5 mm)
scanning area max	14“ x 200” (355.6 mm x 5080 mm)
scanning speed 3.5D	58 sec @ 300 dpi, 14” x 17” grayscale
scanning speed 4.0D	110 sec @ 300 dpi, 14” x 17” grayscale
scanning speed 4.5D	232 sec @ 300 dpi, 14” x 17” grayscale

Film Specifications

film size min	2.5” x 2.5” (63.5 mm x 63.5 mm)
film size max	14“ x 200” (355.6 mm x 5080 mm)
film holder	8.5” x 4.5”, 12” x 3 1/3”

Power

voltage	AC 100V to 240V, 50/60 Hz
max current	4.0A (Input)
power consumption	Max. 320 W

Operating Environment

operating temperature	50° to 104°F (10° to 40°C)
operating relative humidity	20% to 85%
storage temperature	14° to 140°F (-10° to 60°C)
storage relative humidity	20% to 95%

Weight and Dimensions

dimensions	12.9” x 18.7” x 8.8” (329 x 474 x 224 mm)
dimensions with input tray	329 x 474 x 544 mm
dimensions with input and output tray	586 x 474 x 934 mm
weight	44.5 lbs. (20.2 kg)