Microtek NDT-2000 User Manual

28 NDT-2000 User's Manual
Scanning Industrial X-ray Films
ScanWizard Industry is a scanning software designed by Microtek for Industrial
X-ray lms scanning used for an industrial purpose. Its user-friendly interface
enables you to easily start the scanning process and nish all the scan jobs.
Refer to the ScanWizard Industry software manual for more details.
1. Follow the procedures for “Positioning Industrial X-ray Film with the Light
Shield” to load the lm into the digitizer's Feed Tray.
2. Launch ScanWizard Industry (either as a stand-alone by clicking the program
icon, or by using the “File-Import” or “Scan” command from an application
program).
NOTE: If it is your rst time to turn on
the digitizer and to launch the program,
if the Light Shield is not pull up, the
program will prompt a window to remind
you. Bring up the Light Shield and click
the Calibration button. Then, the digitizer
will start to calibrate.
When the calibration is done, click the
OK button to bring in main windows of
ScanWizard Industry program.
To skip the reminding window, pull up
the Light Shield before turning on the
digitizer.
3. Click the Overview button to perform a preliminary scan of the image, which
will appear in the Preview window.
4. Select your image output type in the Type drop-down menu.
– Select Gray Scale to scan the image
in 8-bit grayscale. This is also the
default setting of the software
program.
– Select Gray Scale (16-bit) to scan the
image in 16-bit grayscale.
5. Select your desired image output
resolution in the Resolution drop-down
menu. The default setting is 300 dpi.
6. Select the Scan Frame tool ( ) from
the Toolbar in the Preview window,
and choose the area to be scanned
by dragging a rectangle around it.
You will see a ashing frame (marquee)
around the selected area.

Microtek NDT-2000 Specifications

Scanning Specifications

resolution	1200 dpi (21 μm)
optical density	0.37D~ 4.5D
scanning area min	2.5” x 2.5” (63.5 mm x 63.5 mm)
scanning area max	14“ x 200” (355.6 mm x 5080 mm)
scanning speed 3.5D	58 sec @ 300 dpi, 14” x 17” grayscale
scanning speed 4.0D	110 sec @ 300 dpi, 14” x 17” grayscale
scanning speed 4.5D	232 sec @ 300 dpi, 14” x 17” grayscale

Film Specifications

film size min	2.5” x 2.5” (63.5 mm x 63.5 mm)
film size max	14“ x 200” (355.6 mm x 5080 mm)
film holder	8.5” x 4.5”, 12” x 3 1/3”

Power

voltage	AC 100V to 240V, 50/60 Hz
max current	4.0A (Input)
power consumption	Max. 320 W

Operating Environment

operating temperature	50° to 104°F (10° to 40°C)
operating relative humidity	20% to 85%
storage temperature	14° to 140°F (-10° to 60°C)
storage relative humidity	20% to 95%

Weight and Dimensions

dimensions	12.9” x 18.7” x 8.8” (329 x 474 x 224 mm)
dimensions with input tray	329 x 474 x 544 mm
dimensions with input and output tray	586 x 474 x 934 mm
weight	44.5 lbs. (20.2 kg)