Microtek NDT-2000 User Manual

NDT-2000 User's Manual 41
Cleaning the Glass Surface on the Digitizer
Due to the glass on the digitizer is indented and located in the groove, you have
to use the forceps come in the cleaning bag as an aide to x the lint-free cloth to
clean the glass.
Before cleaning the glass, check for the major components included in the
cleaning bag.
When done, follow the steps below to clean the glass surface on the digitizer.
For detail descriptions, refer to the printed document come with the cleaning bag
inside the package.
Forceps (Straight and Serrate)
Lint-free cloth (Several pieces)
Remove the glass cover
Clean the indented glass
1. Open the front cover of the
digitizer.
2. Locate the glass cover and
remove it from its compartment
part.
3. Loose the the ratchet (snap
lock) of the forceps.
4. Put the lint-free cloth on the
serration of the forceps.
5. Clean the indented glass located
in the groove.
6. Put the glass cover back into its
original position.
Please store the printed document
about how to clean the indented
glass carefully for the use in the
future. .

Microtek NDT-2000 Specifications

Scanning Specifications

resolution	1200 dpi (21 μm)
optical density	0.37D~ 4.5D
scanning area min	2.5” x 2.5” (63.5 mm x 63.5 mm)
scanning area max	14“ x 200” (355.6 mm x 5080 mm)
scanning speed 3.5D	58 sec @ 300 dpi, 14” x 17” grayscale
scanning speed 4.0D	110 sec @ 300 dpi, 14” x 17” grayscale
scanning speed 4.5D	232 sec @ 300 dpi, 14” x 17” grayscale

Film Specifications

film size min	2.5” x 2.5” (63.5 mm x 63.5 mm)
film size max	14“ x 200” (355.6 mm x 5080 mm)
film holder	8.5” x 4.5”, 12” x 3 1/3”

Power

voltage	AC 100V to 240V, 50/60 Hz
max current	4.0A (Input)
power consumption	Max. 320 W

Operating Environment

operating temperature	50° to 104°F (10° to 40°C)
operating relative humidity	20% to 85%
storage temperature	14° to 140°F (-10° to 60°C)
storage relative humidity	20% to 95%

Weight and Dimensions

dimensions	12.9” x 18.7” x 8.8” (329 x 474 x 224 mm)
dimensions with input tray	329 x 474 x 544 mm
dimensions with input and output tray	586 x 474 x 934 mm
weight	44.5 lbs. (20.2 kg)