Microtek NDT-2000 User Manual

42 NDT-2000 User's Manual
Cleaning the Rollers
Prolonged used of the digitizer may result in accumulation of ink and other
residue on the feeder’s rollers, affecting their efciency. Clean the rollers
periodically to maintain performance.
Rollers are found in two areas of the NDT-2000: Directly on the digitizer, and on
the inner side of the front cover.
To clean the rollers inside of the digitizer:
1. Push down two Release buttons at both sides of the front cover of the
digitizer and open the front cover.
When opening the front cover, support the both sides of the front cover with
your hands, avoiding suddenly falling down of the front cover.
2. When the front cover is opened, you can nd several groups (4 sets) of
rollers located at the inside of the digitizer. Clean the rollers with a lint-free
cloth or a swab moistened with alcohol or ECO cleaner, as shown in the
graphic below.
NOTE:
• Remember to clean all rollers inside of the digitizer at one time.
• Wipe off dirt and stains from the surfaces of the rollers horizontally while
cleaning. Do not wipe them vertically in order to avoid dropping off dirt or
stains into the interior of the scanner.
• While cleaning, wipe rollers only toward the same direction. Do not wipe
back and forth over the surface of the rollers.

Microtek NDT-2000 Specifications

Scanning Specifications

resolution	1200 dpi (21 μm)
optical density	0.37D~ 4.5D
scanning area min	2.5” x 2.5” (63.5 mm x 63.5 mm)
scanning area max	14“ x 200” (355.6 mm x 5080 mm)
scanning speed 3.5D	58 sec @ 300 dpi, 14” x 17” grayscale
scanning speed 4.0D	110 sec @ 300 dpi, 14” x 17” grayscale
scanning speed 4.5D	232 sec @ 300 dpi, 14” x 17” grayscale

Film Specifications

film size min	2.5” x 2.5” (63.5 mm x 63.5 mm)
film size max	14“ x 200” (355.6 mm x 5080 mm)
film holder	8.5” x 4.5”, 12” x 3 1/3”

Power

voltage	AC 100V to 240V, 50/60 Hz
max current	4.0A (Input)
power consumption	Max. 320 W

Operating Environment

operating temperature	50° to 104°F (10° to 40°C)
operating relative humidity	20% to 85%
storage temperature	14° to 140°F (-10° to 60°C)
storage relative humidity	20% to 95%

Weight and Dimensions

dimensions	12.9” x 18.7” x 8.8” (329 x 474 x 224 mm)
dimensions with input tray	329 x 474 x 544 mm
dimensions with input and output tray	586 x 474 x 934 mm
weight	44.5 lbs. (20.2 kg)