Microtek NDT-2000 User Manual

NDT-2000 User's Manual 9
Knowing about Your Film Digitizer
The NDT-2000 is a sheet-fed lm digitizer, which is specically designed for
digitizing radiographic lms used in NDT (non-destructive testing). With a
great mechanism design and innovative lming technology, the NDT-2000 can
capture details in bright and dark areas of industrial X-ray lms. Equipped with
a sheet-fed holder, the NDT-2000 can digitize lm with a size up to 14” x 200”.
Moreover, optional Auto Film Feeder (AFF) and Multi-channel Film Feeder (MFF)
provide the professionals a convenient method to digitize the physical originals
for the electric data storage, saving maintenance time and storage space
enormously.
Features of the NDT-2000
The NDT-2000 comes with several important features, including the following:
• Premium Image Quality — With a high resolution of 1200 dpi (21μm), a
dynamic range of 4.5 Dmax, and the 16-bit grayscale, the NDT-2000 allows
users to catch wider areas for grayscale tones, presenting grayscale images
in better details.
• Wide Area of Optical Density (OD) — The NDT-2000 is capable to catch
images with values of OD between 0.37D and 4.5D, enriching the lightness
and darkness of images in plentiful ways.
• Meet with the Standard of EN ISO 14096 — The NDT-2000 is a digitizer
which fully measures up to the DS classes in EN ISO 14096. By controlling
of the hardware and OD, the NDT-2000 divides image qualities into three
levels (3.5D, 4.0D, 4.5D); therefore, it can meet with various requirements
toward image quality and make a scanning job more exible.
• Highly Efcient Green LED — Adopting green LEDs as the light source, when
the digitizer is detected by the system, there are no requirements for any
warm-up time before carrying out the scan, which boots your productivity
and reduces energy costs amazingly. Comparing with white LEDs, green
LEDs generate better performance and thus the image quality will remain
consistent even after used for a certain period of time.
• Support Various Sizes of X-ray Films — The NDT-2000 covers the scanning
of all standard industrial X-ray lms sizes, from 2.5” x 2.5” to 14” x 200”,
which offers more exibility to digitize X-ray lms.
• Exclusive Film Holders — These lm holders are specically designed for
either positioning the lm xedly or maintaining the scanning size for the
scanning target. It is quite useful for scanning of lms in same size. Two
types of industrial lm holders provided, they are 8.5” x 4.5” and 12” x 3
1/3”.
• Exclusive Design of a Light Shield — The NDT-2000 is equipped with a light
shield exclusively designed for lms with a size less than 10.24” (26 cm).
It can cover up non-essential lights outside lm and thus helps users to get
better quality for scanned images.

Microtek NDT-2000 Specifications

Scanning Specifications

resolution	1200 dpi (21 μm)
optical density	0.37D~ 4.5D
scanning area min	2.5” x 2.5” (63.5 mm x 63.5 mm)
scanning area max	14“ x 200” (355.6 mm x 5080 mm)
scanning speed 3.5D	58 sec @ 300 dpi, 14” x 17” grayscale
scanning speed 4.0D	110 sec @ 300 dpi, 14” x 17” grayscale
scanning speed 4.5D	232 sec @ 300 dpi, 14” x 17” grayscale

Film Specifications

film size min	2.5” x 2.5” (63.5 mm x 63.5 mm)
film size max	14“ x 200” (355.6 mm x 5080 mm)
film holder	8.5” x 4.5”, 12” x 3 1/3”

Power

voltage	AC 100V to 240V, 50/60 Hz
max current	4.0A (Input)
power consumption	Max. 320 W

Operating Environment

operating temperature	50° to 104°F (10° to 40°C)
operating relative humidity	20% to 85%
storage temperature	14° to 140°F (-10° to 60°C)
storage relative humidity	20% to 95%

Weight and Dimensions

dimensions	12.9” x 18.7” x 8.8” (329 x 474 x 224 mm)
dimensions with input tray	329 x 474 x 544 mm
dimensions with input and output tray	586 x 474 x 934 mm
weight	44.5 lbs. (20.2 kg)