Microtek NDT-2000 - Optional Multi-channel Film Feeder (MFF)

56 NDT-2000 User's Manual
Optional Multi-channel Film Feeder (MFF)
The Multi-channel Film Feeder (MFF) is an optional accessory for the NDT-2000
digitizer. The MFF only works with X-ray lm, allowing to scan 2-3 sheets of
60 mm, 70 mm, 80 mm, 90 mm, 100 mm, 120 mm, 140 mm, 3.3 inch and 4.5
inch in width lms at one time.
After unpacking the MFF package, check for the items shown below.
Specications of MFF:
– Film Capacity : 3 sheets of 60 mm, 70 mm, 80 mm, 90 mm, 100 mm, 3.3
inch and 4.5 inch in width lms at one time; or, 2 sheets of 120 mm and
140 mm in width lms at one time.
– Dimension: 700 (L) x 420 (W) x 255 (H) mm
– Weight: 4.45 kg
The coming section describes how to install the MFF on the NDT-2000 and how
to scan X-ray lms by using the MFF.
Screw & Washer Sets
Film-rolling
Rack
Quick-lock Nuts
Back Supports
MFF Mask Kit
Base Tray
Multi-channel Film Tray