178 Chapter 20: Scenes And Shows (Automation)
PRO1 Live Audio System
Operator Manual
Automation controls
Although automation is supported on the master bay control surface by the
automation section, most of the functionality is accessed via the GUI. The
Automation screen allows editing of scenes, show files and events, and provides
access to the scope editing screens. Additionally, the GUI has a Files screen for show
file management and transfer.
Automation controls on the control surface and GUI
Item Control Function
1 Red cancel button Cancels a store operation and closes the Store
window (illuminates to prompt when this button is
active).
2 Yellow NOW
button
Recalls the currently highlighted scene in the cue list,
clearing any unsaved adjustments.
3 Green NEXT LCD
button
Recalls the next scene/point scene (highlighted in
green) in the cue list.
4 Red LAST button Recalls the previous scene (highlighted in red) in the
cue list.
5 Green ok button Confirms an action (illuminates to prompt when this
is necessary).
6 store/[STORE
SCENE] button
Opens the Store Scene window (see “To create a
new scene using the current settings” on page 81)
and lets you store the current settings to the
currently selected scene.
To Next Page
Loading...
Need help?
General
