Midas PRO1 User Manual

275
PRO1 Live Audio System
Operator Manual
Chapter 31: Output Channels
This chapter shows you the areas on the control surface that are used to manage the
outputs and also describes their function. There are three type of output: auxes,
matrices and masters.
The structure of this chapter is loosely based on the signal path of the output channels
and also the processing areas, which are opened via the output channel overview
displays in the GUI channel strip.
Output channel routing
The following table shows the approximate signal path of each output type.
* Order can be swapped (see “Processing order” on page 291).
# Includes side chain section.
Channel controls Aux Matrix Master
Configuration See page 289 See page 289 See page 289
Direct input See page 291 See page 291 See page 291
*#Dynamics (dual
compressor)
See page 283 See page 283 See page 283
Insert See page 291 See page 291 See page 291
*EQ See page 284 See page 284 See page 284
Mixes Matrix sends only
(see page 292)
N/A N/A
Master controls,
solo select and
fader
See page 292 See page 292 See page 292

Midas PRO1 Specifications

General

Brand	Midas
Model	PRO1
Category	Stereo System
Language	English