Midas PRO1 - System Devices; Monitors

396 Appendix G: Parameters Affected By Automate Patching
PRO1 Live Audio System
Operator Manual
System devices
Sources for the outputs of external devices, such as the DL451 Modular I/O and
DN9696 Recorder, etc., can be changed per scene. The sources are selectable via the
Stage I/O and FOH I/O tabs in To section of the Patching screen (see Chapter
8 "Patching" on page 45). However, this does not include the I/O card configuration.
Monitors
The following monitor sources can be changed per scene.
Item Parameter
1 Talk input source
2 Taklback input source
3 PFL direct input source
4 AFL direct input left source
5 AFL direct input right source
6 External monitor input left source
7 External monitor input right source
1
2
3
4
5
6
7