397
PRO1 Live Audio System
Owner’s Manual
Appendix H: Parameters Protected By
Safes
This appendix shows the parameters affected/unaffected by each of the safe types (EQ,
DYN, MIC, AUTO, MUTE and FADER).
Note: The parameter areas for the scopes (store and recall) and the safes are, basically
the same. However, the way they are presented in their respective appendices is
different. This may provide you with a useful alternative when referring to this
material, should you prefer one more than the other (see Appendix F "Parameters
Affected By Scope" on page 349).
The following table is intended as a reference guide to help you go quickly to the area
you want.
Note: Throughout this appendix, when referring to the hardware controls in either
fader bay the default channel assignments are used (that is, inputs in the channel fader
bay and outputs in the mix fader bay). This is because any channel type can be
assigned to either fader bay.
Channel
or Group
EQ safe DYN safe MIC safe AUTO safe MUTE safe FADER
safe
Input
channel
Page 400 Page 402 Page 404 Page 405 Page 406 Page 407
Aux Page 410 Page 412 Page 413 Page 413 Page 414 Page 415
Return N/A N/A Page 418 Page 418 Page 419 Page 420
Matrix Page 423 Page 425 Page 426 Page 427 Page 427 Page 428
Master Page 431 Page 433 Page 434 Page 434 Page 435 Page 436
VCA
group
N/A N/A N/A Page 438 Page 439 Page 439
To Next Page
Loading...
Need help?
General
