20 Chapter 3: About The PRO1 Control Centre
PRO1 Live Audio System
Operator Manual
Connections
The PRO1 has a rear panel and sockets on the control surface for the connection of
mains power, AES50 I/O unit(s), USB devices (includes showfile storage and system
updates), keyboards, headphones, talk mics, communications, external monitor, AES3
synchronisation, diagnostics (for service personnel only), lamp and word clocks (75R).
For more information, see Chapter 29 "Connections" on page 241.
Rear panel connectors (top) and storage USB connector on the control surface
Keyboard
A QWERTY keyboard (supplied) is used mainly for inputting text, such as when
configuring a channel or using automation.
External interfaces
Various devices can be used with the PRO1, such as:
• External USB mouse: Instead of using the navigation zone to operate the GUI
screen, you can use an external USB mouse. This can be plugged into one of the
USB connectors on the rear panel. The USB mouse behaves in the same way as any
PC mouse.
• External USB keyboard: You can plug a USB keyboard into one of the USB
connectors on the rear panel of the PRO1.
To Next Page
Loading...