Midas PRO1 - Appendix G Parameters Affected by Automate Patching; Inputs

393
PRO1 Live Audio System
Owner’s Manual
Appendix G: Parameters Affected By
Automate Patching
This appendix shows the patching parameters (sources) that can be changed on a
per-scene basis in automation. These are only selectable when the Automate
Patching option of the Preferences scene is selected (see “Using patching in
automation” on page 187).
Inputs
The following input channel sources can be changed per scene.
Although the mic input and tape input sources are
automatable, that is, they can be changed per scene,
they are controlled by the input patching recall scope
area switch (see Figure 30, “Parameter sections per
input channel,” on page 351). They are not affected
by the Automate Patching function.
Item Parameter
1 Insert return source
2 Compressor side chain source
3 Gate key source
Insert processing area Compressor processing area
1
2
3
Gate processing area
Input patching recall
scope area switches