Input Channels 475
PRO1 Live Audio System
Operator Manual
Bus sends
This section shows the mix send control parameters that are linked across a channel
pair.
Note: Only aux sends 1 to 8 are shown above, but this is typically the same for all bus
sends (eight matrices and 16 auxes).
Item Control Parameter
1 ON switch Bus send on/off
2 level/pan control
knob
Bus level, or pan when bus is linked. (When
sending onto a stereo bus the send pan controls
are not linked.)
3 PRE switch Pre-fader on/off
4 level control knob Bus level
5 On switch Aux bus send on/off — only available when aux
bus is in group mode
6 MINUS switch Aux bus send mute on/off — only available when
aux bus is in mix minus mode
3
2
1
3
4
1
As per
bus sends
1-2 above
5
6
To Next Page
Loading...
