Technical Information
124
G 5xxx
With the SensorDry function, an optimal drying result is consistently
achieved through specific matching of individual parameters (such as rinse
aid dispensing of up to 6 milliliters per wash). Additional information can be
found in Section 080-2.5.
Remedy:
Brief explanation of the benefits that the customer can enjoy with SensorDry.
3.3 Program Can Be Selected but Not Started
Symptom:
After switch-on, display is normal and LEDs light up/flash as usual. However,
a program cannot be started after selection.
Cause:
Incorrect positioning of adjustable door lock latch prevents the door contact
switch from closing.
Remedy:
Reset the adjustable door lock latch.
Cause:
Door seal incorrectly seated, preventing the door contact switch from closing.
Remedy:
Check the door seal seating and adjust as necessary.
Cause:
Connections between the electronic module and the door contact switch are
open-circuited.
Remedy:
1. Check the connection wires for continuity.
2. Replace plugs and wires, if necessary.
3.4 Program Interrupted, No Fault Indication
Symptom:
Program interrupted suddenly. No fault is indicated by the LEDs. No fault is
registered in the fault memory.
Cause:
Incorrect positioning of adjustable door lock latch prevents the door contact
switch from closing.
Remedy:
Reset the adjustable door lock latch.
Cause:
Door seal incorrectly seated, preventing the door contact switch from closing.
Remedy:
Check the door seal seating and adjust as necessary.
To Next Page
Loading...
