Technical Information
60
G 5xxx
4.3 Door Outer Panel Removal
Warning!
Take care to hold and support the door outer panel when removing it.
1. Uninstall the appliance.
2. Disconnect the appliance from the power supply.
3. Open the door and remove the countersunk screws (T20; see Figure 030-
3, Item 2) around the inner edge.
4. Close the door and take off the door outer panel.
Figure 030-3: Outer Door Panel Removal
Note:
Touchtronic only: When installing the door outer panel, make sure that
the cutouts in the door outer panel are correctly located in the mounting
bracket.
Navitronic only: When mounting the outer door panel, make sure that the
tabs under the fascia panel are inserted into the slots at the top edge of the
door panel.
To Next Page
Loading...
