EasyManua.ls Logo

Miele G 5705 - Technical Information; Fault Repair; Condensation Forms on Adjacent Cabinets; Noises During Drying Cycle

Miele G 5705
159 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Technical Information
67
G 5xxx
3 Fault Repair
3.1 Condensation Forms on Adjacent Cabinets
Symptom:
During the drying cycle, condensation may form on the cabinets to the left
and right of the dishwasher.
Cause:
Extraneous air is sucked in the area of the condenser.
Remedy:
1. Remove the right side panel (Section 010-4.1).
2. Seal the opening behind the rib of the condenser with silicone sealer
(such as Therostat); see Figure 040-2.
Figure 040-2: Condenser Pocket
Note:
In some models, the opening at the condenser pocket may already be closed.
Remedy:
Modify the dishwasher with the “Vapors VI” conversion kit.
3.2 Noises during Drying Cycle
Symptom:
After the fan is switched on, there may be noises during the drying cycle.
Cause:
Fan impeller not firmly mounted.
Remedy:
Replace the fan (see Section 040-4.5).

Table of Contents

Related product manuals