Miele PG 8591 - Specialized Water Connections; Pressurized DI Water Connection; Fully Demineralized Water Ring Line

Water connection
*INSTALLATION*
143
 Do NOT shorten or otherwise damage the inlet hoses.
See installation diagram supplied.
Retrofitting the
large-surface
filter
If the water contains a high level of insoluble components, a large-
surface filter can be installed between the faucet and the water inlet
hose.
The large-surface filter is available from Miele Service.
Pressurized DI
water connection
(30-1,000kPa /
4.4-145psi)
This machine can be connected to pressurized DI water with a
pressure between 30-1,000kPa (4.4-145psi). If the water pressure is
below 200kPa (29psi) the water intake duration will be automatically
increased.
 The pressure tested hose for DI water, coded green, has a ¾ inch
female connection with garden hose thread and is connected to the
onsite DI water tap.
 If the machine is not going to be connected to fully
demineralized water, the DI water connection has to be deactivated
by Miele Service. The inlet hose remains on the back of the
machine.
Fully demineralized water
ring line
The machine can be connected to a ring line system for fully
demineralized water. For this purpose, it must be technically adapted
and the controls reset by Miele Service.
Please contact Miele Service for further information.