Miele PG 8591 - Program Interruption; Cancelling Programs

Operation
58
Cancelling a program
 If a program is cancelled, the items in the machine must be
reprocessed again.
 Be careful when opening the door.
The wash load could be hot. Danger of scalding, burning, and
chemical burns.
Program
cancelled due to a
fault
The program stops prematurely and an error message appears in the
display.
Take appropriate steps to resolve the fault, depending on its cause
(see “Problem-solving guide”).
Cancelling a
program manually
A program which is already running should only be cancelled if strictly
necessary, e.g. if the wash load is moving about significantly.
 Press and hold the Start/Stop button until the display changes to
the following view:
Program cancellation
No
Yes
 Use the  and  arrow buttons to select Yes.
 Pressing the OK button interrupts the program. Entry of a code may
also be required (see “Further settings/Code”).
If no button is pressed for several seconds, or if the process is
cancelled using the  button, the display will revert to the program
sequence display.
Restarting the
program
 Start the program again or select a new program.