Miele PG 8591 - Program Drainage Time Adjustment; Increasing Program Drainage Time

Program settings
97
Increasing
drainage time
If there is still water remaining in the wash cabinet at the end of a
wash block, because e.g. the on-site drainage system is inadequate,
the following error message will be displayed to enable water to be
drained out of the wash cabinet within the designated time:
Check drainage
In this case, the drainage time can be increased.
...
Drainage time
Drainage time
Standard
Extended
- Standard
The standard drainage time setting applies.
- Extended
Drainage time is increased by a strictly preset increment.
Program duration will increase with this setting.
 Select an option using the  and  arrow buttons.
 Press OK to save the setting.