Additional settings
88
Water hardness
You can use this menu to set the water softener to the water
hardness of the mains supply.
For more information see “Water softener”.
Display: Temperature
The wash cabinet temperature can be viewed during a program.
Either the current actual temperature or the required temperature
which has been preset for the current wash block is displayed.
Open the menu as follows:
Button
Additional settings
Display view
Display view
Actual temperature
Required temperature
- Actual temperature
Display the current actual temperature in the wash cabinet.
- Required temperature
Display the required temperature which has been preset for the
current wash block. If a temperature has not been set, a dotted line
--- is shown.
During a program both settings are displayed as Temperature. There
is no breakdown of actual and required temperature.
Select an option using the and arrow buttons.
Press OK to save the setting.
To Next Page
Loading...
