Miele PG 8591 - RS232 Interface Settings; RS232 Configuration Parameters

Additional settings
87
RS-232
- Print reports
Subsequent selection of cycle reports (see “Process
documentation”).
- Language 
Any one of the following languages can be set for the RS232
interface:
German, English (GB), French, Italian, Spanish, Portuguese,
Swedish or Russian.
- Mode
– Terminal
Connection to a terminal or terminal emulator.
Cyrillic characters are not available as ASCII code. When
Russian is selected as the language, the information appears in
English(GB).
– Printer
Connection to protocol printer
- Baud rate
Transfer speed of the interface.
– 2400, 9600, 19200, 38400, 57600, 115200.
- Parity
Ensuring data transmission. The parity of the sender and receiver
must match.
– none, even, odd.
- Reset
The interface configuration is reset to the factory defaults.
Following parameters are preconfigured:
Baud rate 9600
Bit 8
Parity none
Stop bits 1