Program guide
146
Program Application
Pre-rinse
1 2 3
(Free memory)
Programmable program for special applications;
programming by arrangement with Miele Service.
(Free memory)
Programmable program for special applications;
programming by arrangement with Miele Service.
Vario TD Dental
Cleaning and disinfection program according to
ENISO15883 for processing wash loads with normal
soiling.
(X)
CW
1Min
Vario TD Dental+
Washing and disinfection program with increased wash
pressure and increased water levels according to the
Vario TD Dental program.
Program for the combination of the upper basket
A 105/1 and the module A 315.
CW
1Min
Vario TD Intensive
Cleaning and disinfection program according to
ENISO15883 for processing wash loads with heavy
soiling.
CW
1Min
Special 93°C-10'
For cleaning and thermal disinfection at 199°F/93°C
with 10minutes temperature holding time (exposure
time).
Rinse
Program for rinsing the wash cabinet, for flushing out
brine (see “Water softener/Adding reactivation salt”),
or for rinsing heavily soiled wash items, e.g., for
preliminary removal of soiling, residual disinfecting
agent, or to prevent residues from drying on and
forming incrustations before running a full load.
Drain
To drain away wash water, e.g., after a program has
been cancelled (see “Operation/Cancelling a
program”).