Miele PG 8591 - Rinse Aid Dispensing; Rinse Aid Refill Indicator; Adjusting Rinse Aid Concentration

Adding and dispensing process chemicals
48
 Close the container.
 Wipe up any spilled rinse aid. This prevents over-foaming occurring
during the next program.
Refill indicator
When the fill level is low in the (DOS 2) supply container for rinse aid
you are reminded to refill it.
Refill rinse aid
 Confirm the message shown with OK and
 refill the rinse aid as described.
Dispensing
rinse aid
The dispensing concentration is set by Miele Service.
- If there are spots of water left on load items after reprocessing, then
the dispensing concentration is set too low.
- If clouding or smearing appears on load items, the dispensing
concentration is set too high.
 In either case, contact Miele Service and have the dispensing
concentration reset.