Miele PG 8591 - Rinse Aid Management; Adding Rinse Aid to Reservoir

Adding and dispensing process chemicals
47
Rinse aid
Rinse aid is necessary to ensure water does not cling and leave
marks on items, and to help items dry faster after they have been
washed.
 Residues of rinse aid remain on the surface of items after they
have dried.
It is important to check the suitability of the rinse aid being used.
Rinse aid is dispensed in the Final rinse phase. The reservoir must be
filled for this to occur.
Adding rinse aid
 Do not fill with cleaning chemicals.
This would damage the reservoir.
Only fill the rinse aid reservoir with rinse aid for washer-disinfectors.
 Open the door fully.
 Unscrew the yellow lid with the symbol in the direction of the
arrow.
The container holds approx. 300ml.
 Add rinse aid only until it is up to the “max.” mark on the edge of
the funnel.