Millipore Simplicity system User Manual

Installation
12
Installation of the SimpliPak cartridge
ATTENTION Do not touch the UV Lamp when replacing the SimpliPak cartridge.
Installation
A
• Make sure the front cover is opened.
STANDBY should be viewed on the Display (A).
• Remove the SimpliPak from its shipping box.
• Remove the protective caps on the ports of the SimpliPak cartridge
and from the system.
• Locate the O-rings on the ports. Wet them with water. It is
preferable to wet them with ultrapure water.

Millipore Simplicity system Specifications

General

Brand	Millipore
Model	Simplicity system
Category	Water Filtration Systems
Language	English