Millipore Simplicity system User Manual

Maintenance
26
How to Replace the SimpliPak cartridge
HAZARD Do not touch the UV Lamp when replacing the SimpliPak cartridge.
Removing the SimpliPak cartridge
A
• Remove the Final Filter.
• Open the front cover to go into STANDBY mode. Press the Main
Button. Wait for the system to depressurize. The Display will show
STANDBY blinking for 10 seconds.
• Press your thumbs on the system (A).
B
• Swing the pack towards you and remove the pack from the system
(B).

Millipore Simplicity system Specifications

General

Brand	Millipore
Model	Simplicity system
Category	Water Filtration Systems
Language	English