Millipore Simplicity system User Manual

Maintenance
27
Installing the new SimpliPak cartridge
D
• Remove the new SimpliPak cartridge from its shipping box.
• Remove the protective caps on the ports of the SimpliPak cartridge.
• Locate the O-rings on the ports. Wet them with water. It is
preferable to wet them with ultrapure water.
• Install the SimpliPak cartridge until it is fully seated into the system
ports as shown (D, E and F).
E
F
• CLOSE THE FRONT COVER.

Millipore Simplicity system Specifications

General

Brand	Millipore
Model	Simplicity system
Category	Water Filtration Systems
Language	English