DISPLAY PARAMETERS (P730 to P733, P740)
P730 (G) AUXILIARY READING
Use this feature to display operator selected Auxiliary Readings
temporarily or indefinitely (as desired).
Select "OFF" to display Auxiliary Readings temporarily. Select "HOLd" to
display Auxiliary Readings until another Auxiliary Reading is selected.
(See OPERATION Keypad for RUN mode Auxiliary Reading selection.)
To select the Auxiliary Reading operation desired...
1. to display the Auxiliary Function symbol.
2. or to access the "OFF" or "HOLd" option desired.
3.
If desired, also enter the Parameter Number to default in the
Auxiliary Reading display.
values: 000 to 999
P731 (G) AUXILIARY READING KEY
Enter the Parameter Number whose value is to be displayed in
the Auxiliary Reading field when...
is pressed in the RUN mode.
(See OPERATION Keypad for RUN mode Auxiliary Reading selection.)
values: 000 to 999 (preset to Material Reading, P921)
OPERATION
OPERATION
PARAMETERS
PL-507 131
To Next Page
Loading...
