1-3
1
Before Use
Configuration and function
The Front
The Rear
Carriage
The carriage carries the pen and
moves it up and down.( P.1-5)
Power switch
The switch turn on/off the
power.( P.2-7, 2-21)
Grit roller
The grit rollers operate in combination with
the pinch rollers to feed the sheet.( P.1-6)
Platen
The sheet of media moves along
the platen.
Operation panel
The plotter is operated and functions are set
on the operation panel.( P.1-4)
Clamp lever
Pushing a lever down lowers
a pinch roller and retain the
sheet.
Pinch roller
The pinch rollers feed out the sheet while
pressing it against the grit rollers.( P.1-6)
Clamp pressure lever
This lever adjusts the force by
which the clamp is held.
(P.1-7)
Tray
Small tools, such as a retractable
knife and other cutters, may be
placed on the tray.
USB interface connector
The USB interface connector.
Connected to the USB connector
of the host computer through a
USB interface cable.
(P.1-9)
AC inlet
The power cable is connected to
the AC inlet.( P.1-9)
To Next Page
Loading...
