vii
Features
The features of the plotter are described below. Together with the method of operation of the plotter
explained in this manual, they help you understand how to use the machine properly.
Two Clamp Pressure Modes Changeover Mechanism
The sheet clamp system incorporate two clamp pressure modes changeover mechanism to widen the
available sheet size range.
Strong pressure mode substantially increases the clamp pressure to prevent a long sheet from slipping.
The moderate pressure mode prevents the media from getting scratched by the grit roller during plot
operation.
Front Loading Function
You can mount the roll-placing table in the front side to cut the front-loaded roll sheet.
Plug-in Cutting Software (FineCut) Attached
The plug-in software FineCut, enables easy and fine cutting of the characters or illustrations edited on the
Illustrator or CorelDRAW.
To Next Page
Loading...
Need help?
General
