MIMAKI CG-60SL - DATA CLEAR - Discontinue Plotting -

3-25
Other Useful Functions
3
Useful Function
DATA CLEAR - Discontinue Plotting -
Execute the DATA CLEAR function to discontinue cutting (plotting) for data.
If you do not perform DATA CLEAR, the plotter will perform cutting for the received data when it is returned
to the remote mode.
Once DATA CLEAR is executed, the plotter will perform cutting (plotting) for new data, if received after the
plotter is set to the remote mode.
1
Press the key during data
cutting.
2
Press the key.
• Do not perform DATA CLEAR while the host computer is sending data.
• Even after execution of DATA CLEAR, the received data remains in the receiver buffer. Cutting
(plotting) can be repeated by the No. COPIES function.
DATA CLEAR <ENT>
FUNCTION
ENTER/HOLD