2-15
Loading a sheet of media
2
Basic Operations
5
Press the jog key or to select “LEAF”.
• "Sheet detection"（ P. 2- 12 ）
• ：In the case the sheet is loaded from the rear
：In the case the sheet is loaded from the front
6
Start detecting the sheet.
• After completing the sheet detection, the plotter
performs dummy cutting operation ( P.3-40) .
• This plotter cannot detect the discard sheet of
longer than 3m.
A=654 B=459
CUT1 2 0 050 0 . 3 0
Unit : mm
Displays the detected
size of the leaf sheet.
Displays the current
settings of tool conditions.
To Next Page
Loading...
