MIMAKI CG-60SL - Page 55

Set the distance compensation
3-9
3
Useful Function
13
If the reference value and the measured
value differ from each other, change
the compensation value with the jog
key or .
14
Press the key to determine
the compensated value in the AR
direction.
• You can determine it also with the jog key .
• Move to set the reference length in the AL direction.
15
Input a compensation value in the AL
direction with the jog key or
the same way as step 13.
16
Press the key to determine
the compensated value in the AL
direction.
• You can determine it also with the jog key .
• Move to set the reference length in the B direction.
17
Change the compensation value in the
B direction with the jog key or
.
18
Determine the compensation value in
the B direction by pressing the
key.
• The plotter will return to the local mode.
AR=1.0 AL=0.0
AR=1 . 0 AL
＝
0.0
ENTER/HOLD
AR=1 . 0 AL=1 . 5
B
＝
0.0
ENTER/HOLD
B
＝
0.5
CUT1 2 0 050 0 . 3 0
ENTER/HOLD