3-21
Change the cutting (plotting) order
3
Useful Function
10
Press the jog key or to select
the setting of [AREA] .
• Setting values :
OFF or 10 to 5,100cm (in 10cm increment)
11
Press the key for setting, and press the key.
Reset the Setting of SORTING.
• The setting values are kept in memory even when the power is turned off.
• Changing the setting value will clear the data in the receiver buffer.
• Setting the sorting function to ON will decrease the size of the receiver buffer to about 20 MB.
Follow the Steps 1
to 5 of "Set
SORTING ."
Press the jog key
to select
“OFF.”
Press the
key.
Press the
key twice.
AREA : 500
ENTER/HOLD
END
ENTER/HOLD
END
To Next Page
Loading...
