MIMAKI CJV30-100 Operation Manual

3-19
Setting the Printing Method
3
Extended Functions – Printer –
Setting Logical Seek
1
Perform the operations in P.3-16 Steps 1 to 6.
2
Press to select [LOGICAL SEEK].
3
Press the key.
4
Press to select ON/OFF.
5
Press the key.
6
Press the key several times to end the setting.
Set Value Overview
ON
The printer unit moves according to the size of the data during printing.
Select this when you want to print in a shorter period of time.
OFF
The printer unit moves from the right edge to the left edge of a medium, regardless of the size of
the data. When you use a medium on which ink is hard to dry, you can have a longer drying time.
Unidirectional printing Bidirectional printing
Unidirectional printing Bidirectional printing
Movement of the heads
when Logical seek is OFF
Movement of the heads
when Logical seek is ON
[1]PRINT MODE
DRAFT QUA L I TY < e n t >
[1]PRINT MODE
LOG I CAL SEEK <e n t >
[1]PRINT MODE
LOG I CAL SEEK :
ON
[1]PRINT MODE
LOG I CAL SEEK :
OFF
[1]PRINT MODE
LOG I CAL SEEK <e n t >

MIMAKI CJV30-100 Specifications

General

Brand	MIMAKI
Model	CJV30-100
Category	Printer
Language	English