6-3
Maintenance
6 6
Maintenance
Cleaning the Exterior Surfaces
When the exterior surfaces of the machine are stained, dampen a soft cloth with water or a neutral detergent
diluted with water, squeeze it, and wipe the surfaces with the cloth.
Cleaning the Platen
The platen easily gets dirty with lint, paper dust, etc. generated when a medium is cut.
Wipe off conspicuous stains with a soft-hair brush, a dry cloth, a paper towel, etc.
• When the platen is stained with ink, wipe it off with a paper towel containing a small amount of cleaning
solution for maintenance.
• Before cleaning the platen, make sure that the platen has cooled adequately.
• Because dust and dirt are easily accumulated in the slots for holding a medium and cutting paper (cutter
line), be sure to clean these parts carefully.
To Next Page
Loading...
Need help?
General