MIMAKI CJV30-100 Operation Manual

4-36
Other Settings
Change the settings according to the types of use.
1
Press the key in LOCAL to select the
cutting mode.
2
Press the key.
3
Press the key.
4
Press to select one from the tool conditions (CUT1 to CUT3, PEN, and
HALF) and press the key.
5
Press to select an item to set.
• See "List of Settings" to select one.
6
Press the key.
7
Press to select a set value.
• See "List of Settings" to select one.
8
Press the key.
9
Press the key several times to return to LOCAL.
• The set value is retained even when the power is turned "OFF".
<LOCAL . C >[#01]
CUT 1 ( 3 0 / 6 0 / 0 . 3 0 )
FUNCT I ON C
SETUP <ENT>
SETUP
SELECT : CUT1

MIMAKI CJV30-100 Specifications

General

Brand	MIMAKI
Model	CJV30-100
Category	Printer
Language	English