4-30
11
Press to select a set value of [AREA].
• Set value: OFF or 10 to 5,100 cm (by units of 10 cm)
12
Press the key.
13
Press the key several times to return to LOCAL.
Cancelling the Setting of the SORTING
• The set values are recorded even when the power has been turned OFF.
• When the set value has been changed, the data in the reception buffer is cleared.
• When the sorting function is set to ON, the reception buffer capacity decreases to about 20 MB.
Perform the operations in Steps 1 to
6 in "Setting the Sorting Function".
Press
to select "OFF".
Press .
Press
several times.
To Next Page
Loading...
Need help?
General