6-7
Maintaining the Capping Station
6 6
Maintenance
7
Clean the wiper slider.
• Wipe off the ink sticking to the wiper slider with a clean stick
dipped in cleaning solution for maintenance.
8
Return the wiper to its original position.
• Insert the wiper by holding its both ends.
9
Clean the cap rubber and wiper cover.
• Wipe off the ink sticking to the cap rubber and wiper cover
with a clean stick dipped in cleaning solution for maintenance.
10
Press the key.
• After its initial operation, the machine returns to LOCAL.
To Next Page
Loading...
Need help?
General