4-16
When Nozzle clogged after cleaning
When the nozzle clogging is not improved even after the head cleaning( P.2-17) or the head nozzle
washing ( P.4-8), execute two functions as follows.
Filling up ink
1
Select [HD.MAINTENANCE] of the maintenance menu.
(1) Press the key in the local mode.
(2) Select [MAINTENANCE] by pressing the keys then press the key.
(3) Select [HD.MAINTENANCE] by pressing the keys.
(4) Press the key.
2
Press the key.
• Ink filling is automatically started.
• It returns to the display on the right when the ink filling is
completed.
3
Press the key several times to end.
FILL UP INK
• Supplies ink to correct nozzle clogging.
DISCHARGE&WASH
• Washes the heads, dampers and ink tubes cleaning solution car-
tridge (option). ( P.4-17)
FILLING UP
00: 00
HD . MA I NTENANCE
FILL UP INK <ent>
To Next Page
Loading...
