1-7
Names of Parts and Functions
1
Before Use
Media sensor
The media sensor detects the presence of the media and the media
length.
This machine has a media sensor on the platen (in the rear).
Carriage
The carriage is provided with the ink heads for printing, the cutter
unit for cutting off the sheet of media, etc.
A lever is also provided to adjust the height of Head in 2 stages
according to the thickness of media. ( P.2-6)
• Set the media so that the media sensor located in the
rear of the platen is covered with the media without
fail. The media can not be detected unless it is
placed over the sensor.
To Next Page
Loading...
