4-35
Other maintenance functions
4
Routine Maintenance
Check message in Local mode
The right message is displayed.
1
Check the waste ink tank, and then replace
the waste ink tank ( P.4-36) if required.
When waste ink tank check message is not needed
The waste ink tank check message can be set not to be displayed.
1
Select [Waste Ink Warning] of the machine
setup menu.
(1) Press the key in the local mode.
(2) Select [MACHINE SETUP] by pressing the keys then press the key.
(3) Select [Waste Ink Warning] by pressing the keys.
(4) Press the key.
2
Select "OFF " by pressing the keys.
3
Press the key.
4
Press the key several times to end.
• The check message is not displayed when the waste ink tank warning is set to "OFF". Be sure
to check the ink remaining amount within the waste ink tank visually.
<LOCAL . 1> [ #01 ]
Check was t e i nk<MNT>
Wa s t e I n k Wa r n i n g
SETUP :
O
FF
MACH I NE SETUP
Wa s t e I n k Wa r n i n g < e n t >
To Next Page
Loading...
