4-19
When Nozzle clogged after cleaning
4
Routine Maintenance
Initial ink fill up
Perform the initial fill of ink by the following operations after [DISCHARGE & WASH].
1
Turn the power of the machine on.
• When the power is turned on, the firmware version is dis-
played following [BOOT].
2
Select the ink type to be filled by pressing
the keys.
• To check the state of the cartridge, press the
key. ( P.5-5)
3
Select the ink set (a filling color) to be filled
by pressing the keys.
• You cannot change the current ink set to other ink set yourselves.
• If you want to change the ink set, contact sales office of MIMAKI.
4
Press the key.
BOOT
TS30-1300 V* . * *
Please Wai t
Sb INK SET
4 - Co l o r (MMCCYYKK )
Se t : Sb - 4co l o r I nk
---- ----
To Next Page
Loading...
