MIMAKI TS30-1300 - Setting Priority

3-14
Setting Priority
For the following items, the priority is selected either the setting by the machine (by the panel) or the setting
by the PC (by the host).
Items to be selected : MEDIA COMP. / PRINT MODE / INK LAYERS / DRYING TIME /
AUTO CUT / PRE-FEED / MARGIN / COLOR PATTERN / REFRESH / VACUUM /
FeedSPEED LEVEL
1
Press the key in the local mode.
2
Press the key.
3
Select the type (1-4) by pressing
then press the key.
4
Select [PRIORITY] by pressing the
keys.
5
Press the key.
6
Select the set value by pressing the
keys.
• Set value : INDIVIDUALLY / ALL HOST /
ALL PANEL
• Proceed to the step 7 when [INDIVIDUALLY] is selected.
Press the key then proceed to the step 11 when either [ALL HOST] or [ALL
PANEL] is selected.
7
Press the key.
• The setting display for the media compensation is dis-
played.
8
Select either “HOST” or “PANEL” by press-
ing the keys.
9
Press the key.
• You can also press keys to move between items. Be sure to press the
key to register the setting.
FUNCT I ON
SETUP <ENT>
SETUP
SELECT : TYPE . 1
[1]
PR I OR I TY <e n t >
[1]PRIORITY
SETUP :
A LL PANEL
[1]PRIORITY
SETUP :
I ND I V I DUAL LY
[1]PRIORITY
MED I A COMP . :
H OST
[1]PRIORITY
MED I A COMP . : P ANEL