1-8
Cutter blade and cutting line
The carriage is provided with a cutter unit for cutting off the media that has been printed on.
The cutter cuts off the sheet of media along the cutting line on the platen.
Capping station
The capping station consists of the ink caps, the wiper for clean-
ing the heads, etc.
The ink caps prevent the nozzles in the ink heads from drying up.
The wiper cleans the nozzles in the heads.The wiper is consum-
able.
If the wiper is deformed or the media is stained, replace the
wiper with a new one.
• Be sure to wear the attached goggles in cleaning within the capping station to protect your
eyes against ink.
Cutter unit
Cutting line
Cutter blade
To Next Page
Loading...
