MIMAKI TS30-1300 - Warning and Error Messages; System Warning Messages

5-6
Warning / Error Messages
If some trouble occurs, the buzzer sounds and the display shows a corresponding error message.
Take an appropriate remedy for the displayed error.
Warning messages
Message Cause Solution
The front cover or the maintenance
cover is opened.
Check the front cover and maintenance
covers.
If the same error message appears again
even after closing all the covers, contact
your local distributor to call for service.
A media has not been set. Set media.
The battery life end of the internal
clock is detected.
Contact your local distributor to call for
service.
Time to replace the wiper in the
capping station with a new one has
come.
(The wiping count has reached the
specified value.)
Replace the wiper with a new one.
(P.4-7)
The nozzle recovery cannot be
expected because the machine has
been left standing for a prolonged
period of time.
Perform test printing then check nozzle
clogging.
In the case of nozzle clogging observed,
perform cleaning. ( P.2-17)
In the case of significant nozzle clogging
observed, perform the operations of P.4-8
“Washing of Head nozzle”.
Ink for one supply path has been
nearly used up.
Replace the cartridge for the supply path
corresponding to the indicated color.
You can print without replacing the car-
tridge (until INK END is displayed).
However, the machine returns to local
mode every completion of printing one file.
Ink for one supply path has been
completely used up.
Replace the cartridge for the supply path
corresponding to the indicated color.
Ink cannot be supplied due to the
cartridge per one supply path.
Check the cartridge for the supply path
corresponding to the indicated color.
Ink near end was detected right
after the cartridge with much
remaining amount of ink has been
inserted.
Pull out the inserted cartridge and insert it
again. If the message will be displayed
again, contact a distributor in your district
or our office to call for service.
Cl ose a cover .
** NO MEDIA **
! EXCHANGE BATTERY
<LOCAL. 1> [ #01 ]
Rep l ac e a WI PER<MNT>
<LOCAL. 1> [ #01 ]
!Do TEST DRAW
<LOCAL. 1> [ #01 ]
NEAR END MMBB----
*REMOTE. 1* [ #01 ]
NEAR END MMBB----
<LOCAL. 1> [ #01 ]
INK END ----YYKK
*REMOTE. 1* [ #01 ]
INK END ----YYKK
<LOCAL . 1> !CAR
[#01]
*REMOTE.1* !CAR
[#01]
<LOCAL. 1> [ #01 ]
RE I NSERT CARTR I DGE