Other settings
3-23
3
Convenient use
List of Settings
The underlined has been set when purchased.
Item Outline Set value
Setting of Media compensa-
tion
Corrects the feeding rate of media Refer to P.3-5
Setting of Printing mode
Setting Print quality
Refer to P.3-8Setting Scanning direction
Setting Logical-seek
Setting of the number of ink
layers
Setting the number of layers in which
ink is to be applied.
1
~ 9
Setting of Drying time
Setting the time for drying ink every
scanning.
Refer to P.3-12
Setting the time for drying ink after
the completion of printing.
Setting of Auto cut
Setting whether the media is cut
automatically or not after printing.
ON / OFF
Setting of Pre-feeding
Setting whether the media is carried
back and forth or not before printing.
ON / OFF
Setting of Margins
Setting a left margin on the media
Refer to P.3-13
Setting a right margin on the media
Setting of Color patterns
Setting whether color patterns are
printed at the right end of media or
not.
ON / OFF
Setting of Refreshing Setting the refreshing level of head. 0 ~ 3
Setting of Adsorption Setting the force adsorbing a media
STRONG / STANDARD
/
Little WEAK / WEAK /OFF
Setting of Feeding speed
level
Changing the media feeding speed in
printing.
10 ~ 100 ~ 200%
Setting of Priority
Sets the priority of settings (host /
panel)
INDIVIDUALLY / ALL HOST
/
ALL PANEL
Setting of Auto cleaning
Setting the auto head cleaning oper-
ation performed every printing.
Refer to P.3-16
Setting of In-printing clean-
ing
Setting the auto head cleaning oper-
ation performed during printing.
Refer to P.3-18
Setting of Media detection
Setting the media detecting opera-
tion.
Refer to P.3-20
Setting the detection conditions at
the cutting operation.
Setting of Feed Origin
Setting the media feeding direction to
LED pointer when changing the print-
ing origin position.
ON / OFF
To Next Page
Loading...
