EasyManua.ls Logo

MIMAKI TS30-1300 - CHAPTER 6 Appendix; Machine Specifications

MIMAKI TS30-1300
168 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6-2
Machine specifications
Item TS30-1300
Print head
Method Drop-on-demand piezoelectric print heads
Specification 1 head
Drawing mode (scan x feed)
720 x 540dpi
540 or 720 x 720dpi
540 x 900dpi
540 or 720 x 1080dpi
720 x 1440dpi
1440 x 1440dpi
Usable inks
Sublimation dye ink (Sb54) : 4 colors (Y,M,Bl,K)
6 colors (Y,M,Bl,K,LBl,Lm)
Ink supply
Supplying from ink cartridges through tubes.
Ink cartridge replacement type :
Only at 4 colors: Supplying by Toggle switchover with 2 cartridges/color
Capacity of ink cartridge
6-color set of cartridges :
440cc or 220cc 1 cartridge for each color, 440cc/1 color or 220cc/1
color (2 cartridges, 880cc or 440cc only for magenta and blue)
4-color set installed :
440cc or 220cc 2 cartridges for each color, 880cc/1 color or 440cc/1
color
Media type Photo-paper , Synthetic paper , Duplex paper
Max. printing width 1361mm
Roll Media size
Maximum 1371mm
Minimum 210mm
Thickness 1.0 mm or less
Roll outside diame-
ter
φ 180mm or less
Roll weight
*1
25kg or less
Roll inside diameter 3 or 2 inches
Printing surface Side facing outward
Leaf media size
Maximum 1371mm
Minimum 210mm
Margin
Leaf media
Left end and right end : 15 mm (Default)
Front : 40.0 mm Rear : 98.5 mm
Roll media
Left end and right end: 15 mm (Default)
Front : 40.0 mm Rear : 0.0 mm
Distance accu-
racy
Absolute accuracy Whichever the larger one of ± 0.3 mm or ± 0.3 % of the designated
Reproducibility Whichever the larger one of ± 0.2 mm or ± 0.1 % of the designated
Perpendicularity ± 0.5 mm / 1000 mm
Media skew 5 mm or less / 10 m variable
Head height adjustment 2.0mm / 3.0mm (from the platen surface) 2 levels adjustable
Cutting of media
Cutting of Y direction by the head cutter,
Cutting accuracy (steps) : 0.5 mm or less.
Waste ink tank Bottle type ( 2,000 cc)
Interface USB 2.0
Command MRL- III
Noise
during standby Less than 58 dB (FAST-A, Front & Rear & Left & Right 1 m)
during continuous
printing
Less than 65 dB
during discontinu-
ous printing
Less than 70 dB
Safety Standard
VCCI-Class A, FCC-Class A, UL 60950, CE Marking (EMC,Low Voltage
Directive), CB Report, RoHS

Table of Contents

Other manuals for MIMAKI TS30-1300

Related product manuals