3-2
User type
Registering the drawing conditions together (Type registration)
The drawing conditions are registered in each type (1-4).
The most suitable drawing conditions are settable only by changing the type when replaced by a different
type of media, if the drawing conditions that meet the media to be used have been registered in the type.
Example of type registration
Registering Type
1
Press the key in the local mode.
2
Press the key.
3
Select the type (1-4) by pressing
then press the key.
4
Select and set each item of the list of SET UP functions.
• For the detailed setting procedures, refer to reference pages described in “List of func-
tions”.
Type 1 Photo-paper
Type 2 For PET 1
Type 3 For PET 2
Type 4 Synthetic paper
To Next Page
Loading...
