Front cover
Open the cover in setting of medias, taking of measures
against jamming of medias or in maintenance inside the
station.
Even when the power switch is off, keep this cover and
the other covers closed.
Carriage
Moves the print head unit from side to side.
Operation panel
This panel has the operation keys required for
operating the machine and the LCDs for displaying
setting items, etc.
Clamp lever (front)
Moves the pinch rollers up and down to hold or
release the media.
Power switch
*1
Turns on/off the power to the machine.
Waste ink tank
Waste ink gathers in this tank.
Stand
Supports the main body of the machine. It is pro-
vided with casters that are used to move this
machine.
Take-up device
This device is not installed to the
TS30-1300.
Maintenance cover
Open the cover in maintenance.
Even when the power switch is off, keep
all covers closed.
Platen
The printed media is sent out, sliding on the platen.
Ink cartridges
Each cartridge contains an ink of a
particular color.
Cartridge protection cover
This prevents an injury or breakage
of the machine due to a protrusion of
the 440 cc cartridge.
(It is located under the ink cartridge.)
*1: The power switch under the operation panel lights in green when the power is turned on, and blinks when the
power switch is turned off. The ink clogging prevention function is periodically operated even when the power
switch is OFF if the main power switch keeps being ON. (Sleep function)
P. 1- 5
To Next Page
Loading...
